Calcium Hypochlorite Granuels 25 Kg

Alkalinity Test Kit ( p-m Total )

Featured Product :

Featured Product

Short Description:

RXSOL Calcium Hypochlorite is a widely used chlorine compound that is highly effective against bacteria, algae, slime, fungi and other harmful and objectionable micro-organisms.

RXSOL POTABLE WATER TEST KIT is a monitoring kit enabling shipboard personnel to regularly test the drinking water onboard to help determine whether it is suitable for drinking. The Convention requires the vessel crew to frequently inspect their potable water system and monitor the quality of drinking water, itself. RXSOL POTABLE WATER TEST KIT enables shipboard personnel to test the drinking water as part of their inspection procedures and demonstrate they are monitoring water quality.

Alias:

Drinking water test kit

Application:

RXSOL POTABLE WATER TEST KIT is used for testing potable water, whether supplied from shore side or produced onboard. It is recommended that potable water be tested weekly, (or as may be required by the federal or Port Administration) as well as when potable water is taken onboard. Manual reading should be recorded on a chart or log and retained onboard for at least 12 months.

Feature :

Classified as potable water testing for ships.

Portable water testing equipments product.

RXSOL cooling water test kit

Marine potable water test kit

RXSOL potable water test kit

RXSOL boiler water test kit

Potable water test kit-c

Drinking water standards test kit

Packing Size:

1.00 Complete SET

Image:

Thumb:

Using Procedure:

RXSOL POTABLE WATER TEST KIT contains everything needed to monitor the drinking water onboard in accordance with WHO guidelines. The kit measures pH, free and total chlorine, plus total coliforms and E.coli bacteria. Because variation in the pH level can affect chlorination, it is important to monitor and control the pH. Additionally, potable water should be free of bacteria that are harmful to humans. Testing for coliform bacteria determines whether or not harmful bacteria are present. The test is an important safety measure, especially when potable water is loaded in port.

Chlorine testing is done using the DPD Activator solution is used to determine total chlorine (the sum of free and combined chlorine). Chlorine level is determined using kit and a visual color comparator . Presence/absence test for simultaneous detection of total coliforms and E.coli is done by using Coliform kit.

It should be noted that the sample must be incubated 18-24 hours at 34.5 °C to 37 °C.

Note:

Features

• pH Tester and Buffer Kit
• Chlorine Ampoule Test Kit, including color comparator
• Coliform Test Kit, including UV lamp and safety goggles
• Convenient Carrying Case

Benefits

• Monitors pH level of drinking water to ensure pH level supports chlorination.
• Monitors the level of free chlorine in the drinking water.
• Monitors presence/absence of total coliforms and E.coli.
• Provides for safety of crew
• Easy to use
• Centralized storage for test kits' components
• Withstands rigors of shipboard operations
• Easy to carry

Related Products:

Chloride Test Kit

Nitrite Test Kit

Sulphite (Sulfite) Lab Test Method

Featured Product :

Featured Product

Article News:

Get bacteria free water with Coliform Test Kit

Different Alkalinity testing kits from RxMarine

Short Description:

RXSOL POTABLE WATER TEST KIT is a monitoring kit enabling shipboard personnel to regularly test the drinking water onboard to help determine whether it is suitable for drinking.

Information:

Potable Test Kit supplier in Mumbai, Kolkata - Haldia, Buz buj, Vizag - Visakhapatnam, Gangavram, Chennai - Ennore, Gandhidham - Kandla Mundra. Potable test Kit available for our regular customer with 50% owner discount. Our test kit easily available with all Indian shipping agent and shipchandler. RXSOL Potable Water Test Kit range very easy to handle by any staff easiest compliant Marine Potable Water Testing Kit enables ships staff to monitor the quality of the drinking water on board the ship.

Emergency Escape Breathing Devices (EEBD) supplier for marine, industrial and Oil & Gas industries.

Alias:

EEBD

Application:

Light, compact and easy to use - Emergency Escape Breathing Devices (EEBD)

Packing Size:

0.00 Box

Image:

Thumb:

Using Procedure:

SMALLEST AND MOST DURABLE EEBD.

Think of it as a Life Preserver You Wear on Your Belt

Contains compressed oxygen EEBD (Emergency Escape Breathing Device) provides up to 32 minutes of protection.

Easy to handle can be donned in seconds: simply unlatch the case, pull out the unit, and insert the mouthpiece and nose clip.

The attached hood can be donned at anytime during the escape.

The compressed oxygen and mouthpiece combination allows to be donned in a smoke filled environment.

This can be belt worn in all confined spaces.

The M-20.2 Meets the New SOLAS Requirement for EEBD's

THE OCENCO M-20.2 EEBD:

Quick, easy use - pulling the unit from the case automatically starts oxygen flow.

Low life cycle cost -15 years service life - annual shipboard visual inspection.

Belt wearable - so light and compact it can be worn comfortably on a belt.

Full visibility - the clear Teflon hood protects the user from hazardous environments while allowing a full field of view.

Maximum Protectaion - Teflon hood and breathing bag provide excellent heat and chemical resistance.

Related Products:

EYE & FACE PROTECTION

RESPIRATORY PROTECTION FULL MASKS

RESPIRATORY PROTECTION HALF MASKS

Protective Suit HD

Safety Accessories:

Calcium Chloride Anhydrous

Filter Cartridges

Featured Product :

Featured Product

Short Description:

Emergency Escape Breathing Device EEBD

Information:

Ready stock at Mumbai, Chennai Ennoe, Vizag, Kolkata Haldia , Gandhidham - Kandla

Bentonite Supplier for Oil Field Industries. It is a drilling - grade Bentonite which is naturally occuring clay .It is a High Yield Natural Sodium montomorillonite. It meets API 13A Standards.

Bentonite, very fine grind material mostly composite by clay mineral, especially montmorrilonite which chemically describe as hydrous alumina-silicate which contain small amounts of alkali and alkali -earth metals.

Alias:

Bentonite API, Montmorrilonite

Application:

• It is Viscosifier and Filtration control agent for water based Mud Systems.
• It is used in drilling muds for controlling bore hole stability. It is utilized in drilling muds to extract drill cuttings from the bit.
• It is also used for clearing cat litter

Bentonite, sometimes refer as sometimes referred to as Montmorrilonite is a naturally occurring substance, composed of a number of layers, each approximately 10 angstroms thick, and each consisting of two tetrahedral and one octahedral unit. This structure is responsible for three important characteristics, the ability to absorb large amounts of moisture, the ability to exchange ions and thixotropic gel formation.

Bentonite Powder

We are reputed as one of the most overruling Bentonite Mineral Powder Manufacturers and Suppliers in India. The unmatched quality and efficacy of Bentonite Powder in various sectors like Drilling, Effluent Treatment, Electrical, Engineering, Fertilizer, Foundry, Iron ore Pelletization, Liquor & Food, Pesticides and Pharmaceutical has played a vital role in the enhancement of the demand. Moreover, Bentonite Clay Powder is available in varied grades.

Application

Drilling

Effluent Treatment

Electrical

Engineering

Fertilizer

Foundry

Iron ore Pelletization

Liquor & Food

Pesticides

Pharmaceutical

Packing Size:

50.00 Kg.(PWD)

Image:

Thumb:

Using Procedure:

Bentonite can be Broadely classified in 2 grades :

Granular: Granular is the preferred option for filling trenches where the conductor is covered with Bentonite and then water poured over and mixed in the trench.

Powder: Powder is the preferred method for pouring into bore holes to en-sure the mixture is of a thin enough consistency to reach the bottom of the bore hole. If diamond drilling is required for deep holes, possible 40m depths and deeper and the Bentonite is to be pumped through the core in to the hole, then powder would be the preferred option.

The greatest application of bentonite in industries is the result of its swelling property, while combine with water able to perform multitude jobs. The sodium bentonite having more water absorption capacity makes it suitable for industries like Foundry and Civil engineering application and the calcium bentonite absorb lesser than Sodium still it has some special application like cosmetics, paper, Animal feed binder as many more to describe. Swell Well Mine Chem drilling grade Bentonite is basically a sodium bentonite acquired naturally from the mines. The mineral is processed using the advanced chemical technology for drilling from ores. The below features highlights the quality of the Swell Well Mine Chem Drilling Bentonite, Offers impermeability, Provides high barrel yield. Bentonite is valued in foundry sand binding, drilling mud and sealing agent in civil engineering works, bentonite is used as a mud constituent for oil and water well drilling. Swell Chem Mine is offering Bentonite products for drilling industry. What is Drining Bentonite ? Drilling Bentonite is the Bentonite formed to be used in drilling mud or fluid.

Note:

Advantage

• It helps improve hole cleaning capacities of drilling fluids.
• It is effective as a filtering agent.
• It promotes borehole stability.
• It can be added directly to fresh water or fresh water based drilling fluids.

Related Products:

Dolomite

SODIUM Chloride Crystal PURE

Safety Accessories:

Diesel Guard NB Pwd ( Rust Scale Inhibitor ) DEWT

Chemical Handling Apron

Featured Product :

Featured Product

Short Description:

Maximum swelling property, while combine with water, Our fine quality of sodium bentonite having more water absorption capacity then ordinary one.

Information:

Bentonite premium quality products exporter from India to Middle East - Dubai.

Corrosion Inhibitor for Water Systems having unique formulation with highly concentrated liquid cooling treatment compound with indicator, ferrous & Non ferrous corrosion inhibitors, antiscalants , dispersant and buffer solution of non carbonate. Usefull for use in high or low temperature closed cooling water systems for the prevention of corrosion and scale formation in internal combustion engines, compressors, chiller system and DG sets. Protects all metals including cast iron, mild steels and copper.

Alias:

DEWT NC, Liquid EWT, Cooltreat, Jacket Water Inhibitor, nalco 2000 , Engine water treatment, NCLT diesel ,LIQUIGAURD 2000, ENGINE JACKET WATER CONDITIONER , Gyrocor W.C., Aquafine 103, Care Treat

Active Matter:

68 - 75

Application:

Prolongs the life of equipment by keeping it scale and corrosion free. Since RXSOL-40-4034-025 is alkaline, it will suppress acid corrosion, which would otherwise result in sever pittings. It improves cooling efficiency by maintaining clean heat transfer surfaces , from Radiators, DG - sets, Closed Cooling and chiller System.

Before testing of Nitrite level, Here is some point and guideline, what you need to do. : 1 take the following readings; pH, TDS (uS), and nitrite level.and record. 2 add the Chemical your are using. 3. wait for a period of time for the sysem to circulate. hours> 4. Re check the readings. and record. 5 track these readings
for a period of time.

If the TDS and Nitrite drop you have a leak/ unknown makeup. if the TDS stays stable and the nitrite drops you have a biological problem. Bacteria that convert nitrite to nitrate.

Solution ::: Use DI water in place of general water, And also use. Algaecide to control Bacterial growth inside water system ... http://rxmarine.com/Biocide-Algaecide

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

Refer to technical datasheet.

GENERAL RECOMMENDATION :

Nitrite (as PPM NO2)	0	100-200	300-600	700-900	1100-1300
RXSOL-40-4033-025 / 1000L	13.0	11.3	8-10	5-7	1.5-3.5

NOTE ::: -- If nitrite level becomes 1440-2400 then doses should be ZERO.

Note:

Initial dosage for an untreated system is 9 litres of RXSOL-40-4001-025 / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine life add RXSOL-40-4001-025 every 500 -6500 km. or 250 to 300 hours of running time or every 2 month interval. Specially designed for use in water systems of internal combustion equipment. pH should be maintained between 8.3 and 10 by the treatment.

Related Products:

Descaling Liquid 25 Ltrs

Alkalinity Control 25 Ltrs

Cooling Water Test kit RXSOL 309

Safety Accessories:

Cooling Water Treatment- Techniques and its Uses

Featured Product :

Featured Product

Article News:

Coolant Manufacturer Exporter and Supplier

CHEMICALS FOR CHILLED WATER FLUSHING control of bacteria, fungi and algae

Aquatuff, ACC, Carbon Remover, Electrosolve supplier

Short Description:

Corrosion Inhibitor for Water Systems having unique formulation with highly concentrated liquid cooling treatment compound

Information:

Ship chandlers in Mumbai, Kandla, Chennai - Ennore, Kolkata - Haldia, Vizag - Visakhapatnam, Dubai - Sharjah.

Effective controller of MICRO BIOCIDE and BACTERIA from condensor WATER system. being effective against most kinds of bacteriaa, algae and fungi. It is a particularly useful product for air-wash systems and is compatible with all commonly used antifoulants and corrosion inhibitors.

Alias:

GREEN MICROBIOCIDE, MICROORGANISM CONTROL, Rocide BC 601, BIOCIDE INDION- 7705, CARETREAT 5 SEAWATER, Ferrocid 8583

Application:

Microbiocide based on Organo sulphur compound, for use in open recircurculating systems.

* Highly effective
* Broad spectrum activity
* Economical and easy to use
* Compatible with other treatments.

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

Routine dosage of Rcocide BC 601 to 50 to 100ppm. based on the total water capacity of the system. Dosage will be necessary once or twice per week depending on the severity of the problem.

For badly fouled systems, initial higher dosage of 100-150 ppm. should be given for the first week or two.

The calculate quantity of biocide should be added directly to the system at any convienient point.

Featured Product :

Featured Product

Short Description:

Catalyzed sodium sulfite for corrosion prevention. Generally speaking, sulfite is not present in natural water. In boiler feedwater conditioning sodium sulfite is fed to a boiler to remove dissolved oxygen and thus prevent pitting. For the reaction between sulfite and oxygen to proceed rapidly and completely, it is necessary to maintain an excess sulfite concentration at an elevated temperature.

Alias:

Sodium Sulfite

Application:

Sodium sulfite anhydrous is a white granular material with the chemical formula Na2SO3

It is primarily used in pulp and paper industry. It is used in water treatment as an oxygen scavenger agent, in the photographic industry to protect developer solutions from oxidation, in textile industry as a bleaching, as a desulfurising and as a dechlorinating agent and in leather trade for the sulfitisation of tanning extracts. It is used in chemical manufacturing as a sulfonation and sulfomethylation agent. It is used in the production of rubber chemicals, sulfur dyes and other chemical compounds. It is used in other applications including ore flotation, oil recovery, food preservative, making dyes, and detergent.

White, free flowing crystalline Odorless powder

Dechlorination in municipal wastewater, pulp & paper, power, and textile water treatment plants

Boiler water treatment

Oxygen scavenger

Preservative

Pharmaceuticals

Flue gas desulfurization

Chemical manufacturing in the sulfonation process

Preservative in photo developer solutions

Packing Size:

25.00 Kg.(PWD)

Image:

Thumb:

Using Procedure:

Dose of Sulfite can be controlled by this method ::: Because it readily reacts with oxygen to form sulfate, sulfite is not usually found in natural water systems. In its most common form, sodium sulfite, it is widely used as an oxygen scavenger in feedwater conditioning to prevent pitting in boilers; as a pulping or pulp-bleaching agent by the paper industry; to neutralize residual chlorine in potable water, sewage, industrial effluents, and textile process waters; and as a reducing agent in still other manufacturing processes.

Sample water over 100°F will cause a false-high reading; therefore, quickly cool to room temperature before testing. To prevent a false-low reading caused by the reaction between sulfite and ambient air or dissolved oxygen, water samples should be capped while cooling and then tested without delay. An iodometric drop test is the most popular field method for determining sodium sulfite concentrations.

Reagent packs, containing an instruction and chemicals only, may be purchased for use with buret setups. Note: Sulfide and ferrous iron cause positive interference; copper and nitrite cause negative interference.

Sulfite, Titrimetric Method(0-100ppm)

The test for sulfite is based on the colour change end point reaction. At the end point reagent combines with the indicator to form a blue color.

Apparatus Required

Buret, automatic, 25 ml - 1 ( Sample Tube, Graduated, 25 mL, plastic w/cap and white dot )
Casserole porcelain, 210 ml - 1
Cylinder, graduated, 50 ml - 1
Measuring dipper (plastic) - 1
Stirring rod, glass - 1

Chemicals Required

TK - 13 ::: RXSOL-62-5503-002
TK - 14 ::: RXSOL-62-5503-003
TK - 15 ::: RXSOL-62-5503-004 ( 1 ml =0.5 mg SO3 )

Procedure for Test

The water sample should be freshly obtained with as little contact as possible with air. Do not filter the sample, but cool it to room temperature (70 to 800F).
NOTE:
Sample must be cooled to less than 100ºF (38ºC) to prevent high test results.
Sample must be protected from air contact while cooling to prevent low test results.

1. Measure 50 ml of the water sample with the graduated cylinder . For error free result Collect water to be tested in a clean, preferably large-mouthed, bottle to overflowing. Immediately cap and cool to room temperature.

2. Add three or four drops of TK - 13 ::: RXSOL-62-5503-002 to the sample Swirl to mix. Sample should turn red.

3. Add TK - 14 ::: RXSOL-62-5503-003 Powder a dipper at a time, swirling after each dipper, until color changes from red to colorless. Add 2 more dippers. Swirl until dissolved. ( Note : Use the plastic dipper to add TK - 14 ::: RXSOL-62-5503-003 to the sample. Add only one measure at a time and stir thoroughly between each addition of TK - 14 ::: RXSOL-62-5503-003. All the particle of TK - 14 ::: RXSOL-62-5503-003 may not dissolve and this may create a slight haze in the sample. Continue to add the TK - 14 in this manner until the red color disappears. It is not necessary that the sample solution be exactly neutralized, only that the sample turn colorless. When the sample is colorless, add one additional measure of TK - 14 ::: RXSOL-62-5503-003 and stir. )

4. Add TK - 15 ::: RXSOL-62-5503-004 Reagent dropwise, swirling and counting after each drop, until color changes from colorless to a faint but permanent blue. Always hold bottle in vertical position.
This color change is taken as the endpoint. Record the ml of TK - 15 ::: RXSOL-62-5503-004 solution used.

Calculation of Results

FORMULA: ppm sulfite as SO3 = ml of TK - 15 ::: RXSOL-62-5503-004 x 500 / ml SAMPLE

Using a 50 ml sample, sulfite, in parts per million as SO3 is equal to the ml of TK - 15 ::: RXSOL-62-5503-004 required multiplied by 10.

Limitations of Test :::

This method is rapid and adaptable to field determinations. It is affected by any oxidizable substances in the water such as organic matter sulfides and nitrites. The presence of these interfering substances will cause the sulfite content obtained from this titration to by shown as a higher value than actually exists.

Note:

The use of untreated water in a boiler can cause scale buildup and corrosion. Treating the boiler water with chemicals - known as boiler feed water treatment - will increase the life of the boiler and reduce maintenance costs. Scale is formed from calcium and magnesium salts that are carried in solution in the water used in the boiler. Treatment of the boiler water by raising the pH with the addition of alkaline salts – such as sodium or potassium hydroxide – will prohibit most of the calcium and magnesium salts from precipitating and causing scale buildup in the boiler. Sodium sulfite is a constituent of some boiler feed water treatments. This constituent acts as an oxygen scavenger. The presence of oxygen in boiler water will lead to corrosion of the boiler . A chelating agent, sodium hexametaphosphate is sometimes added to boiler water to inhibit hard water salts from precipitating to form scale. Hydrochloric acid is sometimes utilized in acid boils to remove scale form the boiler.

Related Products:

Sodium Thiosulfate Pentahydrate

Sodium Bisulphite solution

Chlorine Tabs POWERFUL ( 3 Inch Jumbo Size )

Sodium Hypo Chlorite 12-15%

Flocculating Agents

LYE Sodium Hydroxide Liquid 220 ( Liq )

SODA ASH 50 Kg

Safety Accessories:

RESPIRATORY PROTECTION HALF MASKS

PVC Chemical Resistance Boot

Featured Product :

Featured Product

Short Description:

Removal of oxygen using commercial sodium sulfite and a catalyzed sodium sulfite makes great difference . After 25 seconds of contact, catalyzed sodium sulfite removed the oxygen completely. Uncatalyzed sodium sulfite removed less than 50% of the oxygen in this same time period. In a boiler feedwate

Aqutuff High foam is classifed as Cargo Hold Cleaning chemicals and also popular for general Cleaning and Maintenance as well as for Tank Cleaning. There are various type of cargo handle by Ship Bulk carrier like cement, coal, lime and many minerals which is not only directly effecting metal surface of ships but also if charterer or owner wants to change cargo specially for food grain then Aquatuff cleaner plays very important role to clean ship hold on fast and safe.

Alias:

Hold cleaning detergent, Cargo cleaner, Ship Hold Cleaner

Active Matter:

45-48%

Application:

Hold Cleaning Chemicals Aquatuff High foam can be delivered in ports worldwide. Specially our stron network in India and Middle East makes us no1 supplier of hold cleaning chemicals. It is a heavy duty non corrosive concentrated cleaning compound soluble in fresh and salt water , also suitable with high pressure cleanig machines. Ideal for difficult cleaning problems faced in industrial and other plants, Very effective degreaser which removes dirt, oil and grease from the equipment, parts, components, engines, floors and walls etc.

AQUA TUFF HIGH FOAM LIQUID - HD (RXSOL-22-3033-025)

The Importance of Rx Tuff by High-Pressure Cleaning

The job of high pressure cleaning can be done easier & quicker by simply using RxTuffin correct dosages. Using a high pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:

3 Pieces of Good Advice:
Apply RxTuffon dry surface where possible! A dry surface will absorb far better than a wet surface. When applying RxTuff on vertical surfaces: Start application from the bottom and work upwards! If beginning from the top and going downwards, the RxTuff may produce "channels" down the surface, thereby running too fast off the surface. During high pressure cleaning: It is important that the rinsing water does not run over non-cleaned surfaces! The rinsing water can draw soap from the surface if running over non-cleaned surfaces. High pressure together with optimum concentration of RxTuff will give the best effect .

Product Description:-RxTuff is a superior & powerful alkaline cleaner containing corrosion inhibitors to prevents the corrosion of metals . It is low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials .

Applications:-RxTuff Suitable for cleaning engine components like fuel and Lube oil filters, Injection nozzles, pump components, inlet and exhaust valves & primarily refers to cleaning of hard surfaces, such as Decks, Tanks, Engine-rooms, etc. can be used for all types of cleaning and degreasing and may be applied by brush, handspray, high and low pressure washing machines etc.

Directions for Use and Dose Rates:
General Cleaning:- RxTuff can be used for all types of cleaning & degreasing & may be applied by Brush, Hand spray, high and low pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on degree of contamination RxTuff should be mixed with warm water at a rate of 50-200 ml per 10 litres. i.e. 1 cup of RxTuff to a bucket of water. RxTuff solution can be applied simply by mops, brushes or rags, or by dipping the soiled articles into the RxTuff solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, RxTuff is not recommended for washing machines.

Tank Cleaning:-Cargo tank cleaning to remove residues of Mineral, Animal, Vegetable or Fish oil, Waxes & Soot from inert gas systems.

Method of Application and Dose Rates:-

Direct injection method for tank washing machines. Dose rate 1-5 litres per ton wash water (0.1-0.5%).
Recirculation method. Dose rate 1-7 litres per ton wash water (0.1-0.7%).
Spot cleaning. Hand spray neat or diluted with up to 5 parts water and leave for several minutes before rinsing off with clean water.

Cleaning of Cargo Tanks to Remove Soot from Inert Gas Systems:-

Spray RxTuff on with a high pressure cleaning machine and use 1:6 with water. If used with hand sprayer, spray the product neat onto the surface, allowing 1 lit. for every 12 m2. Use a 5-8% solution in a tank washing machine.
Leave for about 30-45 minutes. The surface should be kept wet.
Wash down with hot water (80°C) and check the cargo tank.
Repeat the procedure if necessary.

Packing Size:

50.00 Ltr.

Image:

Thumb:

Using Procedure:

Cleaning agents used in Aquatuff for hold cleaning solution is fully biodegradable and not be harmful to the marine. Allow the Aquatuff High foam solution to act for 10-20 minutes thereafter wash the chemicals with high pressure. Due to compatibility and non hazardous nature of Aquatuff makes it superior all purpose cleaner for tank and cargo hold cleaning to essential maintenance tasks in the engine room, or general cleaning of crew and galley areas, every cleaning task.

Heavy Soil deposition Use Undiluted or up to 5% dilution with water.
Medium soil deposition 10-20% diluted with water.
Light Soil ( general degreasing ) 5-10% diluted with water.

It can be use as an acid-neutralizing agent for Boiler & Colling systems during cleaning & maintenance.

General Cleaning Method :

Step 1: Spraying the AquaTuff over the area to be cleaned.
Step 2: Washing down the area using a high-pressure water jet after 10-20 minutes

After the AquaTuff has been sprayed on the surface and before the wash down begins, the chemicals penetrates & thoroughly moistens dirt & other grime. During wash down, the AquTuff thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results. In addition to being more effective, the use of AquaTuff substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of AquaTuff in correct dosages is half the job done.

Note:- For boiler fire side cleaning, a 10-20 % hot solution, (temp. above 40°C), should be sprayed on to the surfaces to be cleaned. Allow to penetrate for 20 minutes and flush off. For deposits which are very hard to remove, increase the concentration to 50% and repeat if necessary.

Note:

Aquatuff High Foam having good foaming qualities to clean dry cargo to load food grain cargo standard.

Related Products:

Slip Coat RXSOL HOLD BLOCK 210 Ltr

Cement Remover RX Hold

COAL REMOVER rx hold 50 Ltr

Lime Remover HD

Safety Accessories:

Aquatuff chemicals along with ship hold cleaning equipments

Featured Product :

Featured Product

Article News:

Aquatuff price for Mumbai, Kolkata, Chennai, Vizag, Kandla

Aquatuff Ship hold cleaning chemical

Short Description:

Very effective hold cleaning chemicals cleaner for use in hold cleaning and general digressing. its heavy molecular surfactants rapidly reacts with water and produce effective cleaning solution .May be applied by brush, hand spray and by high and low pressure washi

Information:

Bulk carrier cargo hold cleaning chemicals suitable for cargo hold washing. We also supplying lime washing cargo holds cleaning chemicals, slip coat for hold block coating and metal brite to clean rust and sclae and many more marine Tank and hold cleaing chemicals. Lowest price at all Indian and Middle East port is guranteed to our customer, Ship Chandler, Ship Cahrterer, Shipping Agent...

Truck Wash Brightener is a clear liquid which contains inorganic acids and surface active agents that are specifically blended into a stable, highly active concentrate for the cleaning and brightening tractors and tractor trailers. Some of its uses include cleaning bright surfaces, removal of light rust, corrosion protection, conditioner of painted surfaces and conditioning aluminum surfaces.

Active Matter:

63-72

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

Dilute with water before using. The level of dilution depends on the nature and the temperature of the surface being treated.

Can be applied by brushing or high pressure spray wash.

Always Work from bottom to top both on application and rinse. Allow the solution to work for 10 minutes or less prior to rinsing.

Recommended concentrations are 10:1 dilutions for brush application and 20:1 for pressure washing application.

Do not permit solution to dry on surface, rinse completely and preferably by covering area with a high pressure rinse.

When used as directed, it is safe on aluminum, copper, Plexiglas, stainless steel, brass, iron, painted surfaces, steel, bronze, lead and rubber. Also very effective in removing brake dust and black carbon stains. It is not safe on galvanized surfaces, zinc magnesium, chrome and tin.

Related Products:

Heavy Duty Garbage Truck Cleaner

TRUCK Mounted Cleaner Descaler

Stainless Steel TRUCK Cleaner RXSOLVE

Safety Accessories:

Chelating Agent for Metal Ions like Ca, Mg & Fe in water Treatment

Featured Product :

Featured Product

Short Description:

Alias:

1-Hydroxy Ethylidene-1,1-Diphosphonic Acid [HEDP 60%],Hydroxyethylidenedi(phosphonic acid); Dequest 2010; Etidronic acid; HEDP, AQUACID 105EX

Active Matter:

58-62

Application:

RXSOL-81-8160-250 chemically having wide range of applications including scale prevention and corrosion inhibition in water treatment.

Hydroxy Ethylidene -1,1-Diphosphonic acid is organophosphonate with multifunctional properties like sequestration, deflocculation, threshold inhibition and hydrolytic stability, as a single active ingredient. Because of the combination of these properties Hydroxy Ethylidene -1,1-Diphosphonic acid has a wide range of applications. One of the most important applications is in scale prevention and corrosion inhibition in water treatment.

Packing Size:

275.00 Kg.(Liq)

Image:

Thumb:

Using Procedure:

HEDP is used as chelating agent. The dosage of 1-10mg/L is preferred as scale inhibitor, 10-50mg/L as corrosion inhibitor, and 1000-2000mg/L as detergent. Usually, HEDP is used together with polycarboxylic acid. It is used as a strong chelating agent for metal ions like Ca, Mg & Fe in water treatment, textile applications. Its efficient inhibition for CaCO3 & CaSO4 alone or in combination with low molecular weight polymers. Very effective in protecting metal corrosion. HEDP also having very strong chlorine stability.

Note:

Storage for ten months in room shady and dry place. Safety Protection: Acidity, Avoid contact with eye and skin, once contacted, flush with water.

Featured Product :

Featured Product

Article News:

Short Description:

Chelating agent, Scale and Corrosion Inhibitor. Scale prevention and corrosion inhibition in water treatment.

Cleaning of Scale and mineral deposits from truckmount becomes very easy by using RXSOL-41-4148-010 ( TRUCK Mounted Cleaner Descaler ). Routine cleaning and removal of hard water deposits from truckmount heat exchangers, fittings, valves, screens, metering systems, sensors, and water lines etc always be wise deceision. RXSOL-41-4148-010 premium powder formula of specialty ingredients is a for easier and safer cleaning.

Alias:

Truck Mount Descaler

Application:

Good Advice Apply RXSOL-41-4148-010 on WET surface only, Do not let dry the product on surfaces without rinsing. Every machine is different. Basically, pour liquified descaler ( powder with water premixed ) into the water box. If your truckmount has a bypass orifice remove it and replace the plug or cap on the manifold.

Packing Size:

1.00 Kg.(PWD)

Image:

Thumb:

Using Procedure:

Inhibitor protects truck mount components.

First of all mix 1 Kg powder with 4 Ltr water to get powder dissolve completely in to the BUCKET. Then disconnect truck mount water inlet and solution outlet hoses. Drain water completely from water box, Then add 4 Ltr powder mixed water into water box to dissolve. Then start engine to run solution through truck mount atleast for 15 minutes to dissolve scale from surface. Finally connect water inlet hose and solution hose, flush with water for 5 minutes. Add 250ml of Alkali Cleaner RXSOL ORG - 6 to water box and run for 2 to 5 minutes to neutralise residual of scale ion. Then circulate system with clear water to remove all loose particle as well as cleaner present inside the system.

Note For heavy scale build-up Truck Mount Descaler may be diluted with mix 1.5 Kg powder with 4 Ltr water and the solution should be circulated for a longer period.

Note:

Dilutions rates recommended :

Light Duty Cleaning : 500 Gram : 4 Ltrs WATER
Normal Cleaning : 1 Kg : 4 Ltrs WATER 15 minutes or Time duration can be increased up to 45 minutes for Heavy deposit cleaning.
Heavy Duty Cleaning : 1 Kg : 4 Ltrs WATER 15 minutes

Related Products:

Concrete Truck Cleaner (CRMC-83)

Heavy Duty Garbage Truck Cleaner

Truck Wash Brightener

Aluminium Brightner Alu Brite

Safety Accessories:

Effectively remove scalers with the help of Polymer Descaling Chemical

Featured Product :

Featured Product

Article News:

Car Coating Remover from RxMarine helps you remove car coating with ease

Short Description:

For removal of hard water deposits from truckmount heat exchangers, fittings, valves, screens, metering systems, sensors, and water lines etc

Information:

Truck Mount descaler manufacturer, Supplier and exporter in various packing and customized packing. Truck mount descaler are avialable with us in Powder as well as in Liquid stage. Powder form of Descaler are easy to carry and storage while liquid stage of Truck mount descaler is easy to use and application. Liquid decaler cane be easily apply in to the system. Premix with water doesn't required as POWDER Truck mount descaler can't use directly for application, its mixing with water must required.

Fore and Aft cleaning chemicals used as a multipurpose cleaner for the various sector which includes food storage areas; Suitable for cleaning of sanitary fixtures i.e. showers, toilets etc; Can be used on windows and portholes. RXSOL premium quality of fore and aft chemically formulated to remove dirt, oil, grease, grime from ferrous and non-ferrous metal surfaces, porcelain, glass, painted surfaces, stone, cement, wood etc.

Alias:

WATER BASED ECO CHEMICALS

Active Matter:

45-48%

Application:

Suitable for multiple cleaning actions to clean floors, tiles, walls, kitchen platform, utensils, paintwork etc. Also, the diluted solution helps to clean furnitures, plastics, vinyls etc.
Don't forget to Rinse off with water after the cleaning.

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

Mix concentrate materials 150 to 1250 ml with 100 Ltr of fresh water for general cleaning.

Use mops, spray or sponge and rinsed off with water after the cleaning.

Note:

For cleaning of hard surfaces, such as decks, tanks, engine-rooms, etc. These two steps are followed:
High Molecular mixture of CATIONIC and ANIONIC surfactant, to react with all oil and grease molecule

Step	1:	Spray directly on area to be cleaned
Step	2:	With high-pressure clean entire emulsified area

Due to high emulsification & penetration objects achieves optimal cleaning results.
Due to repulsion activity fore aft-Rx preventing dirt from reforming on the surface.

NOTE: Dry surface vastly absorbs the chemical then wet surface so that apply detergent on the dry surface where possible.

Related Products:

T.POL 20 Ltr BUCKET

Descaling Liquid 25 Ltrs

Rocor NB Liquid With Indicator 25 Ltr

Featured Product :

Featured Product

Article News:

A household name in degreaser for all purpose cleaning

Get squeaky clean floors with Floor Stripper Ultra Concentrate

Short Description:

Multipurpose cleaner for the various sector which includes food storage areas; Suitable for cleaning of sanitary fixtures i.e. showers, toilets etc; Can be used on windows and portholes.

Acidic Strong detergent formula specialized for use and suitable for the food industry and cleaning of tile and grout which does not respond to other cleaning agents. It cleans away hard water spots and deposits, grout haze, soap scum, and efflorescence.

Alias:

P3 – HOROLITH V,

Application:

Cleaning of equipment such as pasteurizers, sterilizers and evaporators by removal of salts, lime and rust spots. Also it renews the appearance of ceramic tile, porcelain tile, grout, granite, slate, and sandstone. It is also biodegradable and emits fewer vapors than typical acid cleaners.

Packing Size:

25.00 Ltr.

Image:

Thumb:

Note:

Resuscitate is used when all other cleaners have failed, and is a safer alternative than aggressive acids like phosphoric and muriatic. The proprietary organic acid is twice as effective in dissolving calcium carbonate than phosphoric acid, yet is classified as only a mild skin irritant. Spinergy Resuscitate will readily remove the embedded soil layer thereby renewing the surface of the grout.

Related Products:

Metal Brite

Phosphoric Acid Cleaner Low Foam Food Plant

Tiles And Grout Cleaner ( Restoration )

Safety Accessories:

Acid detergent cleaner for food Industries

Featured Product :

Featured Product

Article News:

Short Description:

Strong Acid detergent Cleaner

Information:

Strong Acid cleaning detergent for pasteurizers, sterilizers and evaporators quickly Removes salts, lime and dissolves rust spots.

It is a new technology surfactant degreaser ( high solvency and emulsification effect ) , Being free from caustic and hydrocarbons it is very gentle on hands & ideal for cleaning walls, wood works, metal and other areas for removal of grease, oil, sludge, carbon deposits, general dirt and grime.

Alias:

AquaSol , Drew Fresh 2000, 651 575613, Aquabreak PX Unitor Chemical Service Part No. 651 575613,

Active Matter:

45-48

Application:

RXSOL-16-3003-025 Mixture of Emulsifier, new technology surfactants ( With high solvency and emulsification effect ) , Corrosion inhibitors, Rust preventive. due to free from caustic and Hydrocarbon very gentle on hands & ideal for cleaning Walls Wood works, Metals and all areas . Acts as superior quality cleaner / degreaser .

Fields:-
RXSOL-16-3003-025 containing corrosion inhibitors to prevents the corrosion of metals such as Aluminium, Copper, Brass and Tin. RXSOL-16-3003-025 is designed to clean Animal / Vegetables oils, Fats, Hydrocarbon removes Dirt, Iink, Carbonized grease, Oil, Heavy oils etc. Specialized for all types of cleaning and degreasing.may be applied by brush, handspray or used in ultrasonic cleaning tanks, immersion soak tanks and high and low pressure spray appliances. May be used neat or diluted by up to 50 parts of water according to the amount and type of soil to be removed.

Tank Cleaning:-
(Cargo tank cleaning after mineral, animal, vegetable and fish oil. )

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

Method of Application and Doses:-
1st of all by stripping suction removes all possible oil (greasy materials). To prevents evaporation of lighter fraction oil flush the system with cold water.May be brushed on, sprayed (Hand spray/Direct injection) recirculate the system with RXSOL-16-3003-025 Solution

1.	Cleaning with washing machines. Dose rate: 0.3-5 ltr per ton wash water (0.03-0.5%).
2.	Cleaning with recirculation method. Dose rate: 0.5-10 ltr per ton wash water, (0.05-1%).
3.	Spot cleaning. Hand sprayed neat or diluted up to 1-10 parts water and left for about 15-20 minutes before.washing.off.

DOSAGE:-

Nature Of Residue	Hand Spray	Direct Injection	Circulation
Veg.Oil (Drying/Non Drying Fish Oil,Alcohol,Acids,Amines)	1-10%	0.03-0.5%	0.05-0.7 %
ORGANIC MATERIAL (HYDROCARBON)	NA	0.0 5-0.5%	0.05-0.7%

RXSOL-16-3003-025 has numerous general cleaning applications including the removal of greases, oil, sludge, carbon deposits, general dirt and grime. Can be used as engine room cleaner. Suitable for cargo tank cleaning. Can be used as accommodation cleaner for bulkheads, decks, toilets. Suitable for cleaning of soiled textiles as rugs, covers, mats, overalls, etc. Effectively cleans glass fibre boats, hulls and painted surfaces

Note:

Aquabreak plays very important role in degreasing as well as cleaning action. Its unique formulation with polymer makes difference from other supplier. Alkyl glucoside is major component of Aquabreak.

Related Products:

B Solve Tank Cleaner & Degreaser

Ballast Tank Cleaner

Hold Wash Concentrate RX

Bilge Clean 25 Ltr

Hand Cleaner Paste, Waterless 1 Kg Pkg

D'limonene Degreaser Premium Quality CITROSOLV

Slip Coat RXSOL HOLD BLOCK 210 Ltr

Safety Accessories:

Gloves Disposable

Chembreak Quick Separating Degreaser - A powerful all-purpose degreaser

Featured Product :

Featured Product

Video Links:

Aqua Break RX

Article News:

Degreaser for Engine and work station

Short Description:

New technology surfactant degreaser for removal of grease, oil, sludge, carbon deposits, general dirt and grime. designed to clean Animal / Vegetables oils, Fats, Hydrocarbon removes Dirt, Iink, Carbonized grease, Oil, Heavy oils etc.

Information:

Multipurpose universal cleaner and degreaser with a pleasant fresh fragrance. Aquabreak has a good cleaning efficiency on contamination and surface effectiveness even after dilution. Resulting shine and cleaned surface. Aquabreak formulated without caustic and hydrocarbon solvents. Its biodegradable properties resulting easy disposal with minimum hazardous to environment.

Keywords:

Also refer this link :::

Aqua Break RX 20 Ltr - Concentrated cleaning agent based on nonionic detergents, alkaline components, special components to stabilise the hardness and corrosion inhibitors for aluminium.RXSOL-16-3003-020

Aqua Break RX 25 Ltrs - New technology surfactant degreaser for removal of grease, oil, sludge, carbon deposits, general dirt and grime. designed to clean Animal / Vegetables oils, Fats, Hydrocarbon removes Dirt, Iink, Carbonized grease, Oil, Heavy oils etc.RXSOL-16-3003-025

Aqua Break RX 210 Ltrs - Specialized for all types of cleaning and degreasing. Effective to clean Animal / Vegetable oils, Fats, Hydrocarbon removes Dirt, Iink, Carbonized grease, Oil, Heavy oils etc. Effectively Clean Fibre Glass, Boats, Hulls and Painted Surfaces.RXSOL-16-3003-210

Aqua Break RX HD 20 Ltr - Numerous general cleaning applications including the remover of grease, oil, sludge, carbon deposits, general dirt and grimeRXSOL-20-3017-020

Aqua Break RX HD 25 Ltr - Advanced degreaser for engine rooms and cargo tanks it can be used for all types of cleaning and degreasing including engine rooms and cargo tanks. Can be used as an accommodation cleaner for bulkheads, deck, toilet etc. Suitable for cleaning of soiled textiles such as rugs, cover, mats etc. EffectivelyRXSOL-20-3017-025

Aqua Break RX HD 210 Ltr - Cargo tank cleaning after mineral, animal, vegetable and fish oil, Effective grease cleaner and free from caustic and hydrocarbonsRXSOL-20-3017-210

Corrosion Inhibitor for Diesel Cooling Water Treatment - RXSOL CIDC is a unique formulation with organic Corrosion Inhibitors, Anti-Scalant for use in closed cooling water systems, for preventing corrosion and scale Formation in Internal combustion engines, compressor cooling system, DG -set at high or low temperature. It is a concentrated liquid, also used as a corrosion inhibitor ( Protects all the metals including cast iron, mild steel, copper .)

Alias:

E.W.T. Inhibitor 9-131c, Water-soluble corrosion inhibitors FOR MTU engine, RXSOL CIDC

Active Matter:

45-50

Application:

The stable oxide film that is formed by RXSOL CIDC prevents corrosion caused by the electrolytic action between dissimilar metals used in the system .RXSOL CIDC has been field tested and found to have no detrimental effects on non-metallic substances such as seals, glands, packing, hoses, gaskets etc., normally used in these’ systems.

Application-Dg*

Sets Internal combustion engines closed circuit cooling system compressor cooling system. RXSOL CIDC incorporates superior corrosion inhibitors to prevent corrosion works by free of scale deposits.

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

Initial dosage for an untreated system is 9 litres of RXSOL CIDC / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine life add RXSOL CIDC every 500 -6500 km. or 250 to 300 hours of running time or every 2 month interval.

Note:

In cases where systems are contaminated with oil and/or scale, they should be cleaned before starting to apply RXSOL CIDC.There are suitable RX BRAND products to carry out the cleaning. Degreasing should be carried out using RXSOL SC 2002 and descaling by using RXSOL DC 1008.

Related Products:

Rocor NB Liquid With Indicator 25 Ltr

RXSOL 2000 corrosion inhibitor

Sodium Molybdate

Featured Product :

Featured Product

Short Description:

Anti-Scalant for use in closed cooling water systems , for preventing corrosion and scale Formation in Internal combustion engines, compressor cooling system, DG -set at high or low temperature. It is a concentrated liquid , also used as a corrosion inhib

Information:

Water-soluble corrosion inhibitors FOR MTU engine, RXSOL CIDC specialized product for Marine and shipping industrial use. Major supplier in all INDIAN and UAE Middle East coastal. RXSOL CIDC Prolong the life of equipment by keeping scale and corrosion free.

Keywords:

RXSOL CIDC Water-soluble corrosion inhibitors FOR MTU engine.

Tag Identification:

Advatages : -

1. Prolong the life of equipment by keeping scale and corrosion free. Since RXSOL CIDC is alkaline and so will suppress acid corrosion, which would otherwise result in corrosion damage such as pitting. However, the alkalinity control is such that even if the product accidentally overdoses, the pH of the water will remain within limits. The metals which would be affected by extremes of alkalinity or acidity are protected.

2. Improves generating cooling efficiency by maintaining a clean heat transfer

3. Corrosion protection by using a superior corrosion inhibitor.

4. Reduced maintenance and downtime

5. Compatible with Coolants / Antifreeze solution / Glycol .

6. Friendly with Metals (Like steel, Copper, Aluminum, all alloys) & Non-metal (Rubber, Hoses, Gasket etc.)

Useful Area:

Marine Diesel Engine specialized corrosion inhibitor.

NOTE : Initial dosage for an untreated system is 9 litres of RXSOL CIDC / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine, life add RXSOL CIDC every 500 -6500 km. or 250 to 300 hours of running time or every 2-month interval.

Supply Location:

Marine Chemicals
Boiler water treatment chemicals
Fuel oil treatment chemicals
Tank cleaning chemicals
Test kits and reagents
Cooling water treatment chemicals
Oil spill dispersant
Electric cleaning chemicals
Air cooler cleaners
Antiscalants
Defoamers /Surfactants
Oxygen Scavengers
Custom Blending of Water Treatment Chemicals
Water Treatment Chemicals - Raw
Coagulants
Flocculants
Disinfectants
Corrosion Inhibitors
Boiler Water Treatment Chemicals
Precleaning & Passivation
Scale Inhibitors
Corrosion Inhibitors
pH Booster (Inorganics & Organics)
Descaling Chemicals (online / offline)
Sludge Conditioner
Condensate Treatment Chemicals
Amine Based treatment Scale Inhibitors

Corrosion Inhibitors
Biocides
Biodispersant
Dealkalisers
Descalants
Cooling Water Treatment Chemicals
Chiller Water
Treatment Chemicals
Pre cleaning Chemicals
Anticorrosion Treatment
Antimicrobial Treatment
STP Treatment Chemicals
Biocultures
Deodorants
Biomass Setting Agents
Disinfectants
Defoamers
Nutrients
Enzymes
ETP Treatment Chemicals
Coagulant
Flocculant
Decolorant
Dewatering Aids /
Filter Aids
Bioculture – Anaerobic & Aerobic
Deodorants
De-Emulsifiers
Polymers for Filter Press /
dewatering Evaporator Antiscalants
Water Treatment Chemicals
Biocides
Coagulants/flocculants
Corrosion inhibitors
Defoamers
Dust control products
Membrane treatments
Metal passivators
Monitoring and control systems
Odor inhibitors
Oxygen scavengers
Scale inhibitors
Sludge dewatering polymers
MUNICIPAL water treatment chemicals
Coagulants/flocculants
Defoamers
Feed / make down equipment
Membrane treatments
Mixing equipment
Odor inhibitors
Scale inhibitors
Sludge dewatering polymers
MINING & MINERAL PROCESSING
Coagulants/flocculants
Dust control products
Filtration aids
Grinding aids
Monitoring and control systems
Non-sulfide flotation reagents
Rheology modifiers
Scale inhibitors
Specialty dewatering aids
Viscosity modifiers
CHEMICAL PROCESSING
Biocides
Cleaners
Coagulants/flocculants
Corrosion inhibitors
Defoamers
Membrane treatments
Monitoring and control systems
Odor neutralizer
Oxygen scavengers
RO Membrane Treatment Chemicals
RO Pre -Treatment Chemicals
Membrane Antiscalants
Raw water RO (Food grade)
Effluent Recycle RO
Desalination Plants
Membrane Antioxidants
Membrane Cleaning Chemicals
Membrane Preservatives
Online / Offline Biocides
pH Boosters (Food Grade)
Taste Enhancers for RO Product water
Sanitizing Products for PSF, ACF Filter
Media and Pipelines.
Sugar Process Chemicals
Boiler Treatment Chemicals
Juice Clarification Aids
Syrup Clarification Aids
Mill Sanitation Chemicals
Viscosity Reducer
Anti Foamer / Defoamer
Evaporator Antiscalant & Descalants
Sugar Refining Compounds
Color Precipitants
Paper Process Treatment Chemicals
Anti Slimicides
Defoamers
Chemicals For Krofta Applications
Boil –out Chemicals
Vacuum Pump Antiscalant
ETP Chemicals

Generic Name:

Water-soluble corrosion inhibitors FOR engine water treatment

Bentonite Supplier for Oil Field Industries. It is a drilling - grade Bentonite which is naturally occuring clay .It is a High Yield Natural Sodium montomorillonite. It meets API 13A Standards.

Alias:

Bentonite API, Montmorrilonite

Application:

Bentonite Powder

Application

Drilling

Effluent Treatment

Electrical

Engineering

Fertilizer

Foundry

Iron ore Pelletization

Liquor & Food

Pesticides

Pharmaceutical

Packing Size:

50.00 Kg.(PWD)

Image:

Thumb:

Using Procedure:

Bentonite can be Broadely classified in 2 grades :

Granular: Granular is the preferred option for filling trenches where the conductor is covered with Bentonite and then water poured over and mixed in the trench.

Note:

Advantage

Related Products:

Dolomite

Calcium Chloride Anhydrous

SODIUM Chloride Crystal PURE

Safety Accessories:

Alkalinity Test Kit ( p-m Total )

Chemical Handling Apron

Featured Product :

Featured Product

Short Description:

Maximum swelling property, while combine with water, Our fine quality of sodium bentonite having more water absorption capacity then ordinary one.

Information:

Bentonite premium quality products exporter from India to Middle East - Dubai.

Keywords:

Various grade of Bentonite :::

Drilling Grade 1

API 13A Section – 9 Grade Bentonite Powder:

Physical Analysis:

PROPERTIES	PROTOCOL	UNIT	REQUIRED	RESULT
Viscometer Dial Reading at 600 rpm	API Spec. 13A:2004/ ISO 13500: 1998	r/min	30	36
Yield Point / Plastic Viscosity Ratio	API Spec. 13A:2004/ ISO 13500: 1998	_	3 Max	2.5
Filterate Volume	API Spec. 13A:2004/ ISO 13500: 1998	ML	15 Max	14.6
Moisture Content	API Spec. 13A:2004/ ISO 13500: 1998	% by weight	10.0 max.	10
Dry Screen Analysis(Residue Greater than 75 Microns)%	API Spec. 13A:2004/ ISO 13500: 1998	% by weight	4.0 max.	3.0 - 4.0

Drilling Grade API Packing 25 Kgs

IOP Grade Bentonite lumps :

Properties	Protocol	Unit	REQUIRED
Moisture Content	API Spec. 13A:2004/ ISO 13500: 1998	% by wt.	12% to 40 % max.
LOI	IS:2000(P-1)-1985	% by wt.	5 – 10.
Free Swelling Volume 2gm/100ml	ASTM D 5890:1995	ml	32 min.
PH Value of 5% gel	IS:6186-1986	pH	8.0 – 10.0
Plate Water Absorption (16 hours)	ASTM E 946	%	720- 760
Gel Time 2.5gm/25 ml	IS:12446-1988	second	Instant
Methylene Blue Value	API spe 131:2004/ ISO 10416:2002	mg/gm of clay	350 - 400
Lumps size	IS:6186-1986	%	10 to 40 m.m.

Chemical specification:

Alumina as AL2O3%>15.0-19.0 Sodium max 2.70

Calcium as Cao%1.5-2.0 Na2O 2.0-2.5

Mgo 2.5-3.5 iron as Fe2o3% 13.0-18.0

IOP Grade Lumps | 25 Kg Packing

Product: Benotonite Powder for Grouting

Physical Analysis:

Properties	Protocol	Unit	Result
Liquid Limit	IS:12446-2007	ml/100 gm	350 - 450
Moisture Content	API Spec. 13A:2004/ ISO 13500: 1998	% by wt.	12.0 Max
Dry Screen Analysis (passing through 75 um sieve)	IS:12446-2007	% by. Wt.	85.0 min.
Free Swelling Volume 2gm/100ml	ASTM D 5890:1995 or IS:12446-2007	ml	30 min
PH Value of 5% gel	IS:12446-2007	pH	9.5 - 10.0
Gel Time 2.5gm/25 ml	IS:12446-1988	second	Instant
Filterate Volume	API Spec. 13A:2004/ ISO 13500: 1998	ml	20 max
Viscosty at 600 rpm	API Spec. 13A:2004/ ISO 13500: 1998		30 min
Methylene Blue Value	API spe 131:2004/ ISO 10416:2002 / IS:12446-2007	mg/gm of clay	350 - 400

Grouting Grade | 25 Kg Packing

PRODUCT: Ceramic Grade Bentonite Powder

Physical Analysis:

Properties	Protocol	Unit	Result
Free Swelling Volume 2 gm/100ml	IS:12446-2007	ml	12 - 18
Base Exchange Capacity	IS:12446-2007		70 - 80
Moisture Content % by weight	IS:12446-2007	%	10.0 - 12.0
PH Value 2% slurry	IS:12446-2007	0pH	8 - 9
Quartz Content	IS:12446-2007	%	2 - 3 %
Dry Mesh % Passing 200 B.S.S	IS:12446-2007	%	85 Minimum

Ceramic Grade | 25 Kg Packing

Alias:

Drinking water test kit

Application:

Feature :

Classified as potable water testing for ships.

Portable water testing equipments product.

RXSOL cooling water test kit

Marine potable water test kit

RXSOL potable water test kit

RXSOL boiler water test kit

Potable water test kit-c

Drinking water standards test kit

Packing Size:

1.00 Complete SET

Image:

Thumb:

Using Procedure:

It should be noted that the sample must be incubated 18-24 hours at 34.5 °C to 37 °C.

Note:

Features

• pH Tester and Buffer Kit
• Chlorine Ampoule Test Kit, including color comparator
• Coliform Test Kit, including UV lamp and safety goggles
• Convenient Carrying Case

Benefits

Related Products:

Chloride Test Kit

Nitrite Test Kit

Sulphite (Sulfite) Lab Test Method

Featured Product :

Featured Product

Article News:

Get bacteria free water with Coliform Test Kit

Different Alkalinity testing kits from RxMarine

Short Description:

RXSOL POTABLE WATER TEST KIT is a monitoring kit enabling shipboard personnel to regularly test the drinking water onboard to help determine whether it is suitable for drinking.

Information:

Keywords:

potable water testing on ships

portable water testing equipment

RXSOL cooling water test kit

marine potable water test kit

RXSOL potable water test kit

RXSOL boiler water test kit

potable water test kit-c

drinking water standards test kit

Generic Name:

Drinking Water Test

Alias:

Chlorine control, Declor-it, Disodium thiosulfate, S-hydril, Sodium hyposulfite, Sodium oxide sulfide, Antichlor, Sodothiol, Sulfothiorine, Ametox

Application:

Dechlorination in municipal, pulp & paper, power, and textile water treatment plants, Oxygen scavenger – oil well drilling process Mining industries Aluminum cation reaction

Industrial production and laboratory synthesis

On an industrial scale, sodium thiosulphate is produced chiefly from liquid waste products of sodium sulphide or sulphur dye manufacture.In the laboratory, this salt can be prepared by heating an aqueous solution of sodium sulphite with sulphur.

Principal reactions and applications

Thiosulfate anion characteristically reacts with dilute acids to produce sulfur, sulfur dioxide and water-

1.Na2S2O3 + 2HCl →2NaCl + S + SO2 + H2O

This reaction is known as a "clock reaction", because when the sulfur reaches a certain concentration the solution turns from colourless to a pale yellow. This reaction has been employed to generate colloidal sulfur. When the protonation is conducted at low temperatures, H2S2O3 (thiosulfuric acid) can be obtained. It is a somewhat strong acid with pKas of 0.6 and 1.7 for the first and second dissociation respectively.

Iodometry

In analytical chemistry, the most important use comes from the fact that the thiosulfate anion reacts stoichiometrically with iodine, reducing it to iodide as it is oxidized to tetrathionate:

Photographic processing

The terminal sulfur atom in S2O32− binds to soft metals with high affinity. Thus, silver halides, e.g. AgBr, typical components of photographic emulsions, dissolve upon treatment with aqueous thiosulfate:

2 S2O32− + AgBr →[Ag(S2O3)2]3−+ Br−

In this application to photographic processing, discovered by John Herschel and used for both film and photographic paper processing, the sodium thiosulfate is known as a photographic fixer, and is often referred to as hypo, from the original chemical name, hyposulphite of soda.

Gold extraction

Sodium thiosulfate is one component of an alternative lixiviant to cyanide for extraction of gold.[3] It forms a strong complex with gold(I) ions, [Au(S2O3)2]3−. The advantage of this approach is th

2 S2O32−(aq) + I2(aq) →S4O62−(aq) + 2 I−(aq)

Due to the quantitative nature of this reaction, as well as the fact that Na2S2O3•5H2O has an excellent shelf-life, it is used as a titrant in iodometry. Na2S2O3•5H2O is also a component of iodine clock experiments.

This particular use can be set up to measure the oxygen content of water through a long series of reactions. It is also used in estimating volumetrically the concentrations of certain compounds in solution (hydrogen peroxide, for instance) and in estimating the chlorine content in commercial bleaching powder and water.at thiosulfate is essentially non-toxic and that ore types that are refractory to gold cyanidation (e.g. carbonaceous or Carlin type ores) can be leached by thiosulfate. Some problems with this alternative process include the high consumption of thiosulfate, and the lack of a suitable recovery technique, since [Au(S2O3)2]3− does not adsorb to activated carbon, which is the standard technique used in gold cyanidation to separate the gold complex from the ore slurry.

Packing Size:

50.00 Kg.(PWD)

Image:

Thumb:

Using Procedure:

Process for DE CHLORINATION :::

Dissolve the 500 grams of Sodium Thiosulfate in a large pitcher of lukewarm tap water. Stir until all the crystals are dissolved. Then transfer the solution with a funnel to the gallon jug. Top off the jug to make a full gallon of stock solution.

Add two drops of the stock solution per one gallon of the water to be treated.
One gallon can treat 37,850 gallons or more. Over-dosage is virtually impossible.

Note:

Analytical chemistry

Sodium thiosulfate is also used in analytical chemistry. It can, when heated with a sample containing aluminum cation, produce a white precipitation:

2 Al3+ + 3 S2O32− + 3 H2O →3 SO2 + 3 S + 2 Al(OH)3

Medical

It is used as an antidote to cyanide poisoning. Thiosulfate acts as a sulfur donor for the conversion of cyanide to thiocyanate (which can then be safely excreted in the urine), catalyzed by the enzyme rhodanase.

It has also been used as treatment of calciphylaxis in hemodialysis patients with end-stage renal disease.[6]

It is used in the management of extravasations during chemotherapy. Sodium thiosulfate prevents alkylation and tissue destruction by providing a substrate for the alkylating agents that have invaded the subcutaneous tissues. The dose may be 2mL of 0.17M (a solution of 4mL 10% sodium thiosulfate and 6mL sterile water for injection). It may be instilled subcutaneously into multiple sites using a small gauge needle. There is limited data on this method with few recommendations.

in foot baths for prophylaxis of ringworm, and as a topical antifungal agent for tinea versicolor.

in measuring the volume of extracellular body fluid and the renal glomerular filtration rate.

Sodium thiosulfate is also used:

As a component in hand warmers and other chemical heating pads that produce heat by exothermic crystallization of a supercooled solution.

In bleach

In pH testing of bleach substances. The universal indicator and any other liquid pH indicators are destroyed by bleach, rendering them useless for testing the pH. If one first adds sodium thiosulfate to such solutions, it will neutralize the color-removing effects of bleach and allow one to test the pH of bleach solutions with liquid indicators. The relevant reaction is akin to the iodine reaction: thiosulfate reduces the hypochlorite (active ingredient in bleach) and in so doing becomes oxidized to sulfate. The complete reaction is:

4 NaClO + Na2S2O3 + 2 NaOH →4 NaCl + 2 Na2SO4 + H2O

To dechlorinate tap water for aquariums or treat effluent from waste water treatments prior to release into rivers. The reduction reaction is analogous to the iodine reduction reaction. Treatment of tap water requires between 0.1 grams and 0.3 grams of pentahydrated (crystalline) sodium thiosulfate per 10 liters of water.

To lower chlorine levels in swimming pools and spas following super chlorination.

To remove iodine stains, e.g. after the explosion of nitrogen triiodide.

Similarly, sodium thiosulfate reacts with bromine to render harmless products. Solutions of sodium thiosulfate are commonly used as a precaution in chemistry laboratories when working with bromine.

In bacteriological water assessment.

In the tanning of leather.

To demonstrate the concept of reaction rate in chemistry classes. The thiosulfate ion can decompose into the sulfite ion and a colloidal suspension of sulfur, which is opaque. The equation for this acid-catalysed reaction is as follows:

S2O32−(aq) →SO32−(aq) + S(s)

To demonstrate the concept of supercooling in physics classes. Melted sodium thiosulfate is very easy to overcool to room temperature and when crystallization is forced, the sudden temperature jump to 48.3 °C can be experienced by touch.

As part of patina recipes for copper alloys.

Often used in pharmaceutical preparations as an anionic surfactant to aid in dispersion.

It can also be used as a very interesting solute in supersaturation experiments.

Related Products:

Sodium Bisulphite Liq

Sodium Sulphite (sulfite) with Catalyst Powder

Chlorine Scavenger

Sodium Hypo Chlorite (12-15%) 250 Kg

Sodium Meta Silicate

Sodium Meta Bi Sulphate Pwd.

SODA ASH 50 Kg

Caustic Soda Flake 25 Kg

Acrylic Acid

Safety Accessories:

RESPIRATORY PROTECTION FULL MASKS

Chlorine Tablets Calcium Based

Featured Product :

Featured Product

Short Description:

Sodium Thiosulfate used as a Pond / Aquarium Dechlorinator. This product also used as a Photography as a fixing agent (hypo) to dissolve unchanged silver salts from exposed negatives.

Generic Name:

Dechlorination Powder

Sodium Hypochlorite Solution, Used for Sterilizing Water and Swimming Pool...This will - Remove odors. Remove color. Improve permanganate time.

Alias:

Chloros, Bleach, Twin Oxide Compound A, Ipo chlor 16%, Ipochlor Bluetech

Application:

1	Available Chlorine	14-16%
2	Ph	11-13.
3	Sp.Gravity	1.23 - 1.40
4	Free Alkali (Per Lts )	0.42to0.5%
5	Stability	2 to 3 Month ( GENERAL ATMOSPHRIC TEMP ) OR more stable Below 18°C
6	Viscocity	0.98
7	Alkalinity	1.99
8	Appearance	Pale yellow / green
9	Flash point	None
10	Turbidity	nil
11	CU	NIL
12	Biodegradable	Completely biodegradable
13	Free Acid	None

Packing Size:

25.00 Ltr.

Image:

Thumb:

Using Procedure:

6% Sodium Hypochlorite Solution. Disinfectant for use in drinking water. Use one drop of solution per 10 ltrs of drinking water, 600 ml of solution per 36 tons of drinking water.

General formulation to calculate how much bleach is needed to add to a tank or a pipeline to disinfect it to a given chlorine residual using a given disinfectant. Usually someone wants to know how to meet an AWWA Standard (like C651-92, Disinfection of Water Mains). The equation below should be used to estimate the amount of sodium / Calcium hypochlorite (Chlorine Water is 6.00% sodium hypochlorite) needed to disinfect a given quantity of water to a desired chlorine concentration.

req'd residual in ppm
Valume of hypo = volume of water x ( ----------------------------- )
1,000,000 x hypo %

For example , say you had installed a new 5,000 gallon tank and wanted to make sure that you had at least a 100 ppm solution of chlorine in it.

How much 6.00% Hypochlorite would you need to add ?

(5,000 gal x 100 ppm) / (1,000,000 x .06) = 8.33 gallons

How much 12% Hypochlorite solution would you need ?

(5,000 gal x 100 ppm) / (1,000,000 x .12) = 4.17 gallons

If you use calcium hypochlorite (the white, powder version of chlorine, like HTH pool cleaner), the equation becomes:

                                                                                                              req'd residual in PPM
Wgt. of Calcium Hypo (lbs)= gal of water x 8.33 lb / gal m x   ( ----------------------------- )
                                                                                                               1,000,000 x hypo %

This is simply the previous equation multiplied by the conversion factor of 8.33 pounds per gallon of water.

Let's assume that we still need to disinfect 5,000 gallons at 100 ppm.

How many pounds of 65% calcium hypochlorite (HTH pool cleaner) are needed?

(8.33 lbs/ gal. x 5,000 gal x 100 ppm) / (1,000,000 x .65) = 6.4 pounds

Note:

Spraying - Following rough washing to a good Water White or better, apply dilute Bleach to 1 - 3% strength. First wet the tank surface (spray with DI water), then spray all over with Bleach, wait 30 minute (but do not allow to dry) and then rinse very well with DI water, including the tank top towards the sump. To ensure that you have covered all areas properly, this process should be carried out at least twice with good DI water.

Injection -no.

Re-circulation - Following rough washing to a good Water White standard or better, apply dilute Bleach to 1-3% strength. Mix sufficient Bleach with fresh water in the tank and heat this mixture to 40 - 500C, circulate through the drop line if fitted and than circulate through butterworth machine for 3 hours. After re-circulation immediately warm butterworth to (500 C) the tank for 3 hours at maximum pressure, increase the water temperature to 80-850 C after 45 minutes. Check (by smell) that there is no Bleach remaining, then fresh water rinse and dry.

** When there are a number of tanks requiring re-circulation, it may be significantly more efficient to make up a large batch or number of batches that can be transferred on between tanks as required.

* Use a strainer at the pump stack when circulating any solution.
Tank Lining - Stainless / Zinc / Epoxy / Phenolic (Extreme care must be taken if product other than bleach substitute is to be used in any coated space).

**These products become more aggressive with temperature increase, and should not be allowed to dry on tank walls or stored in cargo tanks as cleaning solution or slops.

Related Products:

Chlorine Tabs POWERFUL ( 3 Inch Jumbo Size )

Chlorine Liquid (Food Grade)

Chlorine Scavenger

Sodium Thiosulfate Pentahydrate

Sodium Bisulphite solution

Hand Cleaner Paste, Waterless 1 Kg Pkg

Dish Wash 500 ml

Toilet Cleaner-500 ml

Safety Accessories:

RESPIRATORY PROTECTION HALF MASKS